show mpls fast-reroute database

Syntax

show mpls [ traffic-eng ] fast-reroute database [ ipAddress ]
[ name tunnelName ] [ interface interfaceType interfaceSpecifier ]
[ status { all | desired | establishing | established | active | unknown } ]
[ count-only ] [ filter ]

Release Information

Command introduced before JUNOSe Release 7.1.0.

Description

Displays information about the backup state of protected primary tunnels.

Options

• traffic-eng—Specifies optional keyword for compatibility with non–E-series implementations
• ipAddress—Address of the endpoint for the primary LSP; meaningful only for the tunnel ingress node
• tunnelName—Name of the primary LSP; meaningful only for the tunnel ingress node
• interfaceType—Interface type; see Interface Types and Specifiers
• interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• status—Displays only entries with the specified status:
  • all—Displays all entries regardless of backup protection status
  • desired—Displays entries where backup protection is desired
  • establishing—Displays entries where backup protection is being established
  • established—Displays entries where backup protection is established
  • active—Displays entries where backup protection is active
  • unknown—Displays entries where status of backup protection is unknown
• count-only—Displays count of entries matching command specification
• filter—See Filtering show Commands

Privileged Exec, User Exec

Copyright © 2008, Juniper Networks, Inc. All rights reserved. Trademark Notice.